
弊社で現在取扱っているオプションパーツは以下になります。
定価 \38,640(税込)
ROBO-ONE公式リングと同じ材質の1/9サイズのリングです。
定価 \3,990(税込)
Robot Standに固定したままKHR-2HV/KHR-1HVを収納できるバッグです。
定価 \7,140(税込)
脚旋回軸ユニット。その場での旋回やスラローム歩行などの動作が可能になるKHR-2HV用旋回軸ユニットです。左右の股関節の開閉をサーボ1つで行えますので、サーボを2つ使用するものよりコンパクトで軽量です。
(注意)
別途購入品:サーボモーター 1個(KRS-788HV又はKRS-2350SHV)
動画あり
定価 \22,890(税込)
This is a KRC-3 robot controller with 2ch stick bars on left side.It has 2ch stick bars and 12 buttons, and can be connected with RCB-3HV, RCB-3J, RCB-1(HV) and motion processor(HV).When you connect it with RCB-3HV, you can change motions corresponding stick angles.It has a KRR-1, a wired connection connector and antenna rod.
English Manual(2008/03/08)
定価 \15,750(税込)
This is a plastic body suits for KHR-2HV.It doesn’t colored, and you can color it by yourselves.
(Notice)
In order to put it on a KHR-2HV, you need a bathtab sole (No.01162) on a KHR-2HV.
定価 \18,900(税込)
This is a plastic body suits for KHR-2HV.
(Notice)
In order to put it on a KHR-2HV, you need a bathtab sole (No.01162) on a KHR-2HV.
定価 \7,980(税込)
This is a stand for KHR-1, KHR-1HV, KHR-2HV, Genex and MANOI AT01.You can display a robot and maintenance a robot easily.Also you can insert a robot with a robot stand to a TX bag.
定価 \126,000(税込)
This set includes a bracket and 8 KRS-2350S (No.01221) servos which you can exchange KHR-2HV leg to KRS-2350S.
定価 \99,750(税込)
This set includes a bracket and 8 KRS-2350S (No.01221) servos which you can exchange KHR-2HV leg to KRS-2350S.
Registrated customers only can buy this set.
定価 \19,950(税込)
This set includes a bracket which you can exchange KHR-2HV leg to KRS-2350S.
It does not include KRS-2350S servos.
定価 \2,100(税込)
KHRシリーズに使用可能な樹脂製ソール
定価 \420(税込)
This is for extension cable for servos. Male-Female cable.
定価 \420(税込)
サーボ、センサーの接続ケーブル。長さ100mm。
定価 \420(税込)
サーボ、センサーの接続ケーブル。長さ200mm。
定価 \420(税込)
This is for extension cable for servos. Female-Female cable.
定価 \420(税込)
This is for extension cable for servos. Female-Female cable.
定価 \420(税込)
This is for extension cable for servos. Female-Female cable.
定価 \630(税込)
This is for extension cable for servos with gold shield. Female-Female cable.
定価 \630(税込)
This is for extension cable for servos with gold shield. Female-Female cable.
定価 \630(税込)
This is for extension cable for servos with gold shield. Female-Female cable.
定価 \630(税込)
This is a black parallel cable for KRS-4014.
定価 \630(税込)
This is a parallel cable for KRS-2300 series.
定価 \525(税込)
This is a parallel cable for KRS-786 series.
定価 \315(税込)
This is a lead cable for KRS-788/786/784.
定価 \630(税込)
This is a branch cable, it is useful for setting servos.
定価 \1,890(税込)
This is a connector set for KRS-4000 series with gold shield.
定価 \630(税込)
This is a cable guide set. This includes 2 runner parts, 8 tapping screws(2x6).
定価 \5,250(税込)
ジャイロセンサー。
定価 \7,980(税込)
ツインジャイロセンサー。
定価 \2,940(税込)
2軸加速度センサー。
定価 \6,300(税込)
Red Version用セッティングソフトとインターフェースのセット。USB仕様。
定価 \6,300(税込)
KHR−1等のICS PCインターフェース2のUSB仕様。
定価 \3,150(税込)
HVシリーズ用9セル(10.8V)のニッケル水素バッテリー。容量は300mAh。
定価 \4,410(税込)
HVシリーズ用9セル(10.8V)のニッケル水素バッテリー。容量は800mAh。
定価 \525(税込)
KHR−1標準バッテリー「ROBOパワーセル」用のコネクターセット。バッテリーの補修等に。
定価 \525(税込)
This is a male connector set for ROBO power cell, it includes 10 pieces of make connector and heat shrinkage tube.
定価 \525(税込)
This is a HV connector set, it includes 5 sets of male and female connector and heat shrinkage tube.
定価 \315(税込)
充放電器用バッテリー接続ケーブル。
定価 \840(税込)
KHR-1HV/2HVに付属のスイッチハーネス。
定価 \315(税込)
KRS-784ICS/KRS-786ICS/KRS-788HVの交換用ギヤーセットです。
定価 \2,100(税込)
耐久性能が格段に向上する焼入れ研磨済みのハードタイプ。
定価 \1,050(税込)
KRS−788HV標準装備のメタルギヤー。
定価 \5,250(税込)
KRS−788HV標準装備のメタルギヤー。お得な6セット。
定価 \315(税込)
KRS-4024サーボ樹脂ギヤー。
定価 \525(税込)
耐久性能が向上するKRS-4024用メタルギヤー(1枚入り)。
定価 \2,625(税込)
耐久性能が向上するKRS-4024用メタルギヤー。6個セット。
定価 \3,675(税込)
耐久性能が向上するメタルギアセット。
定価 \3,675(税込)
耐久性能が向上するメタルギアセット。KRS-4013用。
定価 \2,100(税込)
耐久性能が大幅アップ!!KRS-2300シリーズ用。
定価 \3,150(税込)
KRS-2300シリーズ用の強化ギヤセット。
定価 \1,680(税込)
This is a plastic arm for KRS-788/786/784.
定価 \1,680(税込)
This is a plastic arm for KRS-4024.
定価 \1,680(税込)
This is a plastic arm for KRS-4024.
定価 \1,680(税込)
This is a plastic arm for KRS-4024.
定価 \1,680(税込)
This is a plastic arm for KRS-4024.
定価 \1,680(税込)
This is a plastic arm for KRS-4024.
定価 \2,520(税込)
アッパーアームにメタルインサートを内蔵した強化版サーボアーム。
定価 \2,520(税込)
アッパーアームにメタルインサートを内蔵した強化版サーボアーム。
定価 \315(税込)
KRS-4024用フリーホーンセット
定価 \683(税込)
KRS-2346用軸付ボトムケースに対応。
定価 \6,830(税込)
お得な12個入り。KRS-2346用軸付ボトムケースに対応。
定価 \315(税込)
KONDOサーボ全てに対応。厚みを少なくした薄型タイプ。
定価 \1,575(税込)
お得な12個セット。KONDOサーボ全てに対応。厚みを少なくした薄型タイプ。
定価 \315(税込)
KRS-784ICS専用フリーホーン。KHR-1にも使用しています。
定価 \1,575(税込)
お得な12個入り。KRS-784ICS専用フリーホーン。KHR-1にも使用しています。
定価 \1,050(税込)
This is an aluminium low height servo hone.
定価 \5,250(税込)
This is an aluminium low height servo hone.
定価 \1,260(税込)
KRS-2346用の軸付ボトムケースに使用します。ベアリング付で滑らかな動作が可能です。アルミ製。
定価 \6,300(税込)
お得な6個入り。 KRS-2346用の軸付ボトムケースに使用します。ベアリング付で滑らかな動作が可能です。アルミ製。
定価 \1,260(税込)
KRS-4014/4024用アルミフリーホーン。
定価 \6,300(税込)
KRS-4014/4024用アルミフリーホーン。お得な6個入り。
定価 \1,575(税込)
KRS-786用の樹脂製フリーホン、KRS-4024取付用スペーサー、専用フラットヘッドビス のセット。
定価 \788(税込)
メタルインサート内蔵サーボホーン。
定価 \3,938(税込)
メタルインサート内蔵のサーボホーン。お得な6個セット。
定価 \630(税込)
サーボの取り付けをサポート。2枚入り(1台分)
定価 \630(税込)
KRS-2300シリーズ用フリクションスペーサー。
定価 \630(税込)
KRS-4000シリーズ用スペーサー。
定価 \1,260(税込)
KRS-4000用ハンドベース。
定価 \1,260(税込)
KRS-4000シリーズサーボ同士を直交させての取付やサーボホーンなどのパーツの取付が可能です。
定価 \525(税込)
KRS-4000シリーズのフレーム取り付け面高さとサーボホーン面の高さを揃えます。
定価 \525(税込)
サーボホーンのフレーム取り付け面高さを増設します。出力軸内配線が可能になります。 組み合わせ次第でKRS-2000シリーズとの互換も可能
定価 \630(税込)
KHR-2 HVに付属のアームサポーター。KRS-788/786/784で使用できます。
定価 \630(税込)
KRS-4000シリーズ用アームサポーター
定価 \630(税込)
KRS-4000シリーズサーボのメンテナンス等に。
定価 \2,625(税込)
肘の旋回に。KHR-1HV付属品。
定価 \1,260(税込)
KHR-1HV/2HV用のサッカーユニフォームデカール。
定価 \1,260(税込)
KHR-1HV/2HV用のサッカーユニフォームデカール。
定価 \315(税込)
KHRシリーズ用のバスタブソールにジャストサイズのグリップ。滑り止め効果等により安定性がより向上します。
定価 \315(税込)
KHRシリーズ用のバスタブソールにジャストサイズのグリップ。滑り止め効果等により安定性がより向上します。