 |
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
||||||
  |
|||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
||||
 |
|||||||||||
BLASER
Be ready to experience a real gun battle! Hot Proceed has created a kit to equip the robot with a laser gun. Called Blazer System, the kit is composed of a hand holding a laser gun that replaces the original robot's hand, and a system that detects the shoots received by the other opponents. On the back a led screen displays the numbers of shots. Depending on the game's rule, this part of the kit will set off the retirement of the robot either definitively or temporary.
Blaser System
Blaser version 1.0 (big size)
22001
This the version to equip on KHR-1HV. You can install easily by changing the Front Coal by a Large size one. (check below the necessary products for Blaser)
Contents : Blaser System ( Main Board+ Laser gun+ + Blaser receiver (sensor) + Speaker+ Screws + Instruction Manual).
Manual in English
Blaser version 2.0 (little size)
22002
This version is the compact size of version 1. size : 60mmx 40 mm. It has the same functions as version 1. You can use it with Manoi.
Contents : Blaser System ( Main Board+ Laser gun+ + Blaser receiver (sensor) + Speaker+ Screws + Instruction Manual).
Manual in English
Adapters for Playstation Controller
REV-1
22009
REV-1 is the updated version of TEC-3. It is compatible with many playstation controllers.
Manual in English
TEC-3
21003
With Tec-3, you will be able to control the robot with any PSP controller. Compatible only with RCB-3.
Necessary products to install Blaser
REV-1
22009
REV-1 is the updated version of TEC-3. It is compatible with many playstation controllers.
Manual in English
Logitech Cordless Controller for Playstation 2
Website link
2 connection cables
Kondo Kagaku product number : 01179/01180/01133/01134/01135
To connect "REV-1(or TEC-3) to the controller" and "RCB-3 to Blaser main board".
2 dry cell batteries (for controller)
Servo Arm
Used to assemble the laser gun on KHR
Kondo Kagaku servo arm : 01129, 01183, 01192, 01193, 01195.
Board Cover Set (Large size)
01081
To equip Blaser on KHR or Manoi AT01
Products for Blaser Battle
Blaser target
22003
This is a target to train shooting. You can hang on a wall, or on a autonomous robot in order to train yourself. Battery : CR2023 2 pcs (sold separately)
Blaser Marker
22004
When you participate the Blaser battle it is necessary to distinguish your opponent and your allies. Thanks to the Led (either blue or red), you will be able to make the difference. Battery : CR2023 2 pcs (sold separately)
Blaser Base
22005
This batle base are essential for the competition. Please note that since it is available on request, it will take approximately one month to deliver.
Sample Motion
Contents of the file : 1 shooting motion and 3 hit motion. here
Note :Blaser System and REV-1 are sold with an English Manual!
The instruction manual of the other products will be translated soon!